Chat with us, powered by LiveChat

Raymote®

Raymote® Infrared Remote Control Systems can operate equipment in most industrial applications, frequency-free.

Raymote® Infrared Remote Control systems offer the ultimate in frequency-free wireless control solutions. A perfect fit for industrial applications involving over-head cranes, hoists and other equipment where the operator’s ability to see and assess the situation is essential. Strategically placed sensors enable safe, restrictive operating range.

Features

Line of sight safety
Line of sight safety
No radio frequency interference
No radio frequency interference
No FCC license required
No FCC license required
Easy to install
Easy to install
Uses affordable, off-the-shelf battery power
Uses affordable, off-the-shelf battery power
Controllable sensor placement lets you define operational area
Controllable sensor placement lets you define operational area
Multiple system capability
Multiple system capability
Simultaneous command capability
Simultaneous command capability
Raymote 4002 Infrared Remote Control System

Specifications

Overall Specifications 
CodingDigital with 20 bit addressing
Operating RangeThe system is designed for a normal operating range, to any sensor, 150 feet with TX2.
Temperature Range-20°F to +140° F (-29° C to 60° C)
EnvironmentalTransmitter, Sensor and Receiver sealed against dust to IP65
System DiagnosticsBuilt in LED
Encoding/DecodingMicroprocessor/Software Based
Transmitter Specifications 
Dimensions11.5 x 3.8 x 1.8 inches
CaseCustom molded ABS plastic AO grade. Protection class IP65 without key switch.
Weight2.0 lbs. including batteries
Transmission TypeInfrared with Pulse Modulation
Transmission Beam75 degrees Circular
Carrying MethodOptional adjustable web belt/harness of strong, lightweight nylon fabric
ButtonsCommand buttons are 1 and 2 position momentary
BatteryEight – 1.5V size AA Standard Alkaline
Battery LifeOne (1) Month under normal shift operation
Time Out12 minutes of transmitter non-use will put transmitter in sleep mode to extend battery life.
Sensor Specifications 
Weight1.2 lbs
Reception Angle140 degrees circular pattern
Infrared Frequency950 nanometers
Electrical TerminationBy means of BNC connectors and coaxial cable
MountingBy means of #10 hardware
EnvironmentalWater and dust proof to IP65
Receiver Specifications 
EnclosureIndustrial grade plastic with clear access cover and separate terminal cover
Supply VoltageCustomer supplied 120 VAC, Single Phase 60 Hz – 75VA
Sensor CapabilityUp to 6 sensors per input
Receiving UnitMicroprocessor based
Output RelaysContact rating 110 VAC 5 amps resistive
Fault ProtectionInternal Security circuits with Hamming Parity and Transmitter emergency shutdown
Electrical TerminationBy means of screw terminals, for wire sizes up to #16 MTW, #16 TFFM or equivalent stranded wire
MountingBy means of #10 mounting hardware
EnvironmentalWater and dust proof to IP65
Response Time150 to 330 milliseconds

PRODUCT SPECIFICATIONS ARE FOR REFERENCE ONLY. SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT CONTROL CHIEF FOR VERIFICATION.

Options

-Controls up to eight individual relays
-Choose from three different industrial grade, hand-held transmitter models
-Integrated sensor with receiver

2000

-Controls up to eight individual relays
-Choose from three different industrial grade, hand-held transmitter models
-Integrated sensor with receiver
-Designed for operating cranes with three 2-speed motors
-Double detent motor control pushbuttons on transmitter
-System diagnostic
-Remote shutdown function
-Programmable alert function
-Operating range of 150 ft
-Sensor placement permits operating range modification

4002

-Designed for operating cranes with three 2-speed motors
-Double detent motor control pushbuttons on transmitter
-System diagnostic
-Remote shutdown function
-Programmable alert function
-Operating range of 150 ft
-Sensor placement permits operating range modification
-Designed to operate up to five (5) 2-speed motors
-Full system diagnostics
-Remote shutdown function
-Programmable alert function
-Auxiliary functions can be added
-Motherboard design
-Operating range of 150 ft
-Sensor placement permits operating range modification

6000

-Designed to operate up to five (5) 2-speed motors
-Full system diagnostics
-Remote shutdown function
-Programmable alert function
-Auxiliary functions can be added
-Motherboard design
-Operating range of 150 ft
-Sensor placement permits operating range modification
-Designed for remote operation of 5-speed cranes
-Can control up to five 3-speed or four 5-speed motors
-Full system diagnostics
-Rechargeable battery power
-Remote shutdown function
-Programmable alert function
-Programmable motor sequencing
-Auxiliary functions can be added
-Motherboard design
-Operating range up to 150 ft
-Sensor placement permits operating range modification

7000

-Designed for remote operation of 5-speed cranes
-Can control up to five 3-speed or four 5-speed motors
-Full system diagnostics
-Rechargeable battery power
-Remote shutdown function
-Programmable alert function
-Programmable motor sequencing
-Auxiliary functions can be added
-Motherboard design
-Operating range up to 150 ft
-Sensor placement permits operating range modification

Documentation

Raymote Product Sheet

Customer Connected Booklet

Sales

Sales Manager Greg has been with Control Chief since 2007. His favorite part of his job is working with his customers. If you have questions about any of our products or if you just want to talk about sports......

Greg Caggiano

Sales Manager
Greg has been with Control Chief since 2007. His favorite part of his job is working with his customers. If you have questions about any of our products or if you just want to talk about sports……
Technical Sales Engineer Mark’s greatest joy is helping the customers find solutions to complex problems. With an engineering background and 28 years with Control Chief, if a customer can dream it up, Mark can help them achieve it!

Mark Childs

Technical Sales Engineer
Mark’s greatest joy is helping the customers find solutions to complex problems. With an engineering background and 28 years with Control Chief, if a customer can dream it up, Mark can help them achieve it!

Sales

Sales Manager Greg has been with Control Chief since 2007. His favorite part of his job is working with his customers. If you have questions about any of our products or if you just want to talk about sports......

Greg Caggiano

Sales Manager
Greg has been with Control Chief since 2007. His favorite part of his job is working with his customers. If you have questions about any of our products or if you just want to talk about sports……
Technical Sales Engineer Mark’s greatest joy is helping the customers find solutions to complex problems. With an engineering background and 28 years with Control Chief, if a customer can dream it up, Mark can help them achieve it!

Mark Childs

Technical Sales Engineer
Mark’s greatest joy is helping the customers find solutions to complex problems. With an engineering background and 28 years with Control Chief, if a customer can dream it up, Mark can help them achieve it!